INSTALLATION INSTRUCTIONS:

 
 

Kingair Chimney Liner Kits are intended for masonry chimneys that burn gas, solid fuels or oil. Certain venting specifications are required for the best possible use of your appliance. Make sure to check your instructions for your appliance to determine any special needs for this installation.

You must contact the local building and fire code officials. There may be possible requirements for the installation such as building permits or an inspection of the work site to comply with local building codes.

For the most optimal results and operation of your appliance, you must ONLY use materials or components specified in these installation instructions.

KingAir Chimney liners are tested and UL 1777/ 641/ 441 listed.

 

PRODUCT INFORMATION:

 

• Kingair Chimney stainless steel flexible chimney liners are designed to reline existing chimneys or to be used as a liner in new construction. Manufactured with the highest quality, mill certified alloy.
• The unique manufacturing systems used to make Kingair Liners utilizes a continuous strip of stainless steel, 7-ply interlocked and crimped to produce a gas and water tight lining system of superior strength and durability. Our liners can be curved to go around offsets in chimneys and can be ovalized to custom sizes to fit most any installation requirement. The corrugated construction allows for expansion & contraction during the heat up and cool down periods, which removes any stresses on the system.
• Kingair chimney liners can be insulated with either a vermiculite based poured insulation or with a foil-faced ceramic wool blanket to meet UL 1777 standards for chimney exteriors with zero clearance to combustibles.
• Kingair stainless steel chimney liners come with a lifetime warranty for all fuels, with appliance efficiencies at 83 percent or lower.

 

MATERIALS REQUIRED FOR INSTALLATION OF YOUR KINGAIR CHIMNEY LINER:

 

  • Liner
  • Two piece or one piece tee
  • Tee Cap
  • 90 Deg. or 45 Deg elbow
  • Coupler
  • Screws / Rivets

 

INSULATION MATERIALS REQUIRED (if applicable):

 

  • Kingair Wrap Liner Insulation 1/2" Foil Faced Ceramic Wool Blanket
  • Liner Mesh Protective Wire Mesh Sleeve
  • Aluminum Foil Tape
  • Mesh Clamp
  • Kingair Mix